 |
| |
500 Series Parallel Shaft AC or DC
UP TO 1100 IN-LBS CONTINUOUS
The 500 Series is an ideal solution for application with tight
space constraints requiring high torques. Replace expensive,
inefficient worm drives and reduce input horsepower and
overall cost
|
| QUICK SPECS
|
| Gear Ratio |
Speed RPM |
Max Torque
(in-lbs.) |
Max Input HP |
| 14.2 |
127 |
226 |
1/2 |
| 26.9 |
67 |
428 |
1/2 |
| 54.8 |
33 |
871 |
1/2 |
| 95.5 |
19 |
1033 |
1/3 |
| 114.0 |
16 |
1041 |
1/3 |
| 138.0 |
13 |
1048 |
1/4 |
| 199.3 |
9.0 |
1061 |
1/6 |
| 260.7 |
6.9 |
1067 |
1/8 |
| * Speed based on 1800 RPM motor. |
|
|
 |
|
SPECIFICATIONS
| Gearhead Specifications |
| Housing: |
Precision machined die cast aluminum
|
| Lubrication: |
Lifetime oil bath, grease, food grade lubricants, extreme temperature lubricants
|
| Gearing: |
AGMA class 9 heat treated steel 1st-stage helical, balance spur
|
| Bearings: |
Output shaft supported by ball bearings Intermediate gearing supported with needle bearings and thrust balls
|
| Mounting: |
Any angle |
| Motor Specifications |
| Motor Type: |
Split phase, PSC, 3-phase,
inverter duty, PMDC |
| Motor Frame:: |
42F AC, 32F PMDC
|
| Rotation: |
Reversible
|
| Insulation: |
Class B minimum on AC, Class F on DC
|
| Finish: |
Gloss black powder coatA
|
| Bearings: |
Ball
|
| Features |
| |
• Shaft exit out of either side of housing
• Automatic or manual thermal overload protection available
• Many mounting options
• Terminal boxes or cordsets available
|
| Shaft Options |
| Size: |
1" OD & smaller on single output
3/4" OD & smaller on double output
|
| Materials: |
Carbon steel or stainless steel
|
| Features: |
Keyways, flats, splines, thruholes, threads, hex double output shaft
|
|
|
|
 |
